05-08 Porsche 997 Heads and Red Tails OEM HID or Halogen

Headlights: Timeless: The Porsche 997 has aged gracefully over the last decade, with many Porsche enthusiasts now calling it the last of the truly analog cars. With Mezger engines. Manual transmissions. Few driver aids. These were simpler times, but simpler times also came with simple headlights, and that's one thing we Porsche fans don't necessarily admire. Especially when the original lenses are now starting to haze, and its dark outside. At Morimoto, we get it, and that's why our new 997 Bi-LED headlights are about as future-proof as the 911 itself! Time for a Facelift: The design of our 997 XB LED headlights has been inspired by the latest 992 Generation. The internal Daytime Running Light is fitting to the overall design of the 997 and does a great job modernizing the front-end without standing out as an aftermarket part. The LED DRL is powered by Osram 5000K LEDs and is insanely bright, easily visible during the day just like the OE units too. The DRL will also dim down when the parking lights or low beams are on for compliance reasons. Bi-LED: The Morimoto XB LED headlights for the 997 come standard with a single high-output Bi-LED projector, again just like the OEM 992 headlights. Thanks to their uniquely shaped projector lenses paired with modern optics within, they're going to perform even better than they look. The full LED low and high beam are an instant upgrade over stock, with a wider, brighter low beam, and a high beam that will penetrate far into the distance with ease. To top it all off, these optics meet & exceed all SAE, DOT standards when aimed properly, which is easy to do with their integrated aiming adjusters. PLUG-N-PLAY: As for wiring: Morimoto's LED headlights are designed to work on your 911 without any modifications. They are compatible with the 997.1 and 997.2 with the single and dual projector headlights. It is worth noting however that on the .2 cars, you will need to flash the ECU to eliminate an error code related to the AFS system. WELL-BUILT: Their UV-coated polycarbonate lens will resist the test of time, ensuring your car's new headlights will look good as new for many years to come. The PPS plastic housing is light-weight and much stronger than comparable alternatives. The die-cast aluminum heat-sinks inside the housings provide more than an adequate amount of cooling for the OEM grade LED chips that produce the light. Tail Lights: Timeless: The Porsche 997 has aged gracefully over the last decade, with many Porsche enthusiasts now calling it the last of the truly analog cars. With Mezger engines. Manual transmissions. Few driver aids. These were simpler times, but simpler times also came with simple tail lights, and that's one thing we Porsche fans don't necessarily admire. Especially when the original lenses are now starting to haze, and its dark outside. At Morimoto, we get it, and that's why our new 997 LED tail lights are about as future-proof as the 911 itself! Compatible: these are a direct bolt-on fitment for all 997.1-Era Porsche 911s from 2005-2008 including the Carrera, Carrera S, Cabrio, Targa, and Turbos. They use all of the stock mounting points, and should not take more than a few minutes to install after popping the rear decklid. Plug n Play: The Porsche 997 XB tail lights from Morimoto are designed to work without any modifications, cutting, or splicing. They will plug into the factory connectors for the stock lights on all US-spec cars and function without any error codes or hyperflashing. Integrated resistors are required, but are easy to install via magnetic mounts directly behind the tail light housings. Style: Inspired by the design of more modern LED Tail lights from across the Porsche lineup, these are the perfect solution to update the rear end of your 997.1 without compromising the lines of the car, or risk the addition of something that just doesnt look right. The red-lens model looks especially natural on the car and could truly pass for original-equipment, while the fully smoked version offers a more aggressive and even more modern look, similar to the clear tails from the latest 992 generation. Functions: The optical light pipe that flanks the top-edge of the housings acts as a low intensity parking light. Below that, all three optics serve as the high-intensity red brake light, and amber turn signals, while the inner-most serves as a white reverse light indicator. All optics are designed in conformity with DOT regulations. Well-Built: The durable polycarbonate lens has been UV treated, and will resist the test of time, keeping the housings looking new for many years to come. All wiring and connections are OE grade, and the optics inside are designed to maximize visibility on par with modern Porsche lights. The price is justified, and as the saying goes: you pay for what you get. These tail lights are built to exceed OEM Porsche quality and should easily last the life of your 997!